StarTherm III AW 300 is a factory-insulated sandwich wall panel system that offers outstanding energy efficiency along with aesthetics and durability. The StarTherm III AW 300 composite panel is 42" wide and has an insulating polyurethane foam core between grooved, stucco embossed, 26 gauge exterior and interior skins.

Available in 10 colors and thickness from 2" to 5", U-factors of up to 0.025 (R-39.4) can be achieved.

StarTherm III AW 200 is a factory-insulated sandwich wall panel system that offers outstanding energy efficiency along with aesthetics and durability. The StarTherm III AW 200 composite panel is 42" wide and has an insulating polyurethane foam core between a ribbed, 26 gauge, stucco embossed exterior skin and a grooved, embossed, 26 gauge interior skin.

Available in 10 colors and thickness from 2" to 6", U-factors of up to 0.021 (R-46.9) can be achieved.

StarCFW II is a concealed fastener wall system that provides performance and compatibility. Clean, contemporary looks are achieved by the 1 1/2" deep sculptured profile, embossed texture, and interior attachment.

Available in 24 or 22 gauge steel and formed into a 16" wide 3" deep section. StarCFW II comes in 27 colors and resists damage and abuse.

Roof Panels:

StarShield Standing Seam is a 24" wide panel with a standing rib which is machine double lock seamed 2-7/8" above the drainage surface. The system's two piece sliding clips connect the weathering surface to the structures eliminating panel to structural fastener penetrations, and allowing the weathering surface to move with temperature changes, thereby resisting thermal shock.

High energy efficiency is achieved with concealed clip standoff design which minimizes compression of the insulation. With 6 inches of fiberglass insulation an R-value of 17.29 can be attained.

The system's heavy 22 or 24 gauge steel materials with long life coating and Underwriters Laboratories class 90 rating for wind uplift resistance reduces maintenance costs. Shell white is standard, but all other colors are available as special order.

Dura-Rib is a 36" wide panel with 1-1/8" high ribs on 12" centers. It is available in 24 and 26 gauge steel. The 80,000 pound per square inch yield enhances walk-ability, resistance to hail damage and load carrying capacity.

The purlin bearing leg design makes panel alignment and fastener engagement consistent. Tape sealant at panel laps prevents water migration and air infiltration.

Dura-Rib fasteners are coated with an organic material that tests seven times more resistant to rust than the typical .0003 cadmium-zinc coated fasteners.

The system has both 30 and 90 classification from Underwriters Laboratories, Inc., for wind uplift resistance. Shell white is standard, but all other colors are available as special order.

StarTherm III HR-900 roof panels are designed for use in industrial, commercial, new or re-roof applications where speed of erection, light weight and thermal efficiency are required.

StarTherm III HR-900 is a 40" factory-insulated sandwich roof panel system comprised of a polyurethane foam core between a 26-gauge, ribbed, stucco embossed exterior skin and a 26 gauge, grooved interior skin.

Available in thickness from 1" to 5", U-factors of up to 0.024 (R-42.2) can be achieved. 10 colors available.  

StarASR is Star’s new Architectural Standard
Seam Roof Panel.  It is available in a 2" vertical rib in 16 widths. StarASR has both fixed and floating clips.

The panel’s heavy 24-gauge steel material with long-life coating and Underwriters Laboratories class 90 rating for wind uplift resistance reduces maintenance costs.

BLDGTech Building Systems provides services to architects to help them specify metal construction projects. BLDGTech Building specifications are available in print as well as on disk and may be ordered by faxing a written request on letterhead to Holly Chambers at (405) 636-2037.

For architectural firms with AutoCAD® capabilities and modems, BLDGTech has a download area available for downloading architectural details from this website on a 24-hour basis.

BLDGTech finds that working with architects in the planning stage of a project provides the architect with answers and solutions to many of his design problems. We regularly provide design firms with rigid frame cross sections and reactions, along with specific details when requested.

BLDGTech maintains a list of architectural firms who use metal buildings on a regular basis. These firms have access to detail information, local distributor information, information on past projects and solutions to technical problems, and we receive technical updates from BLDGTech on a regular basis.